Pro-Series

Pro-Series

Membrane Desalination Systems

Fully automated reverse osmosis membrane desalination systems

For brackish, ground & surface water applications.

  • Deliver up to 30,000 Litres/day
  • Handle up to 7,500 PPM Total Dissolved Salts
  • Full stainless steel construction (including control panel)
  • Robust, reliable, effective
  • Fully customisable

Ideal for commercial, industrial and rural

The ROWATER PRO B Series of fully automatic membrane desalination systems are ideal for commercial/industrial/rural applications where a constant and reliable supply of fresh potable water with a low salt content is required.

Suitable for use on Feed Water of up to 10,000 ppm T.D.S., production rates of standard ROWATER PRO B Systems vary from more than 416 Lt/hour PRO B 1000 to 30,000 Lt/day PRO B 3000.

Two-stage process

Each system incorporates a two-stage purification process – mechanical filtration and reverse osmosis to achieve a rejection rate of up to 98 % Total Dissolved Solids.

Customisable to suit application

ROWATER can customise the system design according to the nature of the feed water and daily production rates, as well as meeting purity requirements and storage needs. Applications requiring in excess of 30000Lt./day; desalination of higher salinity feed waters, and/or production of higher purity product water is available, designed on application. Please consult your ROWATER Representative for further details.

Standard features exceed comparable systems

ROWATER PRO B Series boast a range of standard features that others offer as options, including full stainless steel frame.

A comprehensive range of pre-treatment, post-treatment, pure water storage and distribution options are also available, as are alternative voltages and optional export packaging/crating.

Quick straight forward installation

ROWATER PRO B systems are designed for quick and easy onsite installation. Requiring just three inlet/outlet water connections and a single source power connection, installation and commissioning is made simple and straightforward.

Correct tagging and identification of instruments, valves and components ensures easy cross-reference with system installation, operation & maintenance manual.

Automatic operation

Fully automatic, with continuous system operation monitored by visual displays and inbuilt safety controls, each system requires only minimal service and attendance. Complete side and rear access allows for ease of maintenance, when periodic Cartridge and membrane Cleaning/Replacement is required.

Fully tested

Factory wet-testing and complete system sanitation occurs prior to shipment. Built with high quality food grade approved components.

Combining state of the art technology in water purification in a rugged, proven design, each system ensures ease of installation, visually monitored and safety controlled operation, minimal attendance and years of trouble-free operation.

All systems come pre-wired, pre-assembled and fully loaded.

Complete confidence is assured through a commitment to product quality, backed by a 12-month warranty and professional after purchase service and support.

 

PRO Series Overview

In total there are 16 models in the PRO SERIES RANGE.

Listed below you will find specifications for our 3 model families within the “PRO” Series…

 

Series Capacity Range Feed Water Salt Handling Capacity Max Operating Pressure
PRO L ECONO 2,000 to 8,000 Litres Per Day 1500 PPM TDS 1400 kPa
PRO L 10,000 to 30,000 Litres Per Day 1500 PPM TDS 1500 kPa
PRO B 10,000 to 30,000 Litres Per Day 7,500 PPM TDS 2100 kPa

 

Each model can be further customised to suit your requirements.

Refer below for complete specifications for each model in the series.

 

 


 

PRO L ECONO SERIES

2,000 to 8,000 Litres Per Day

 

Unique features (different between the 3 series)

  • Product, recycle and reject flow meters
  • Brass rotary vane high pressure pump

 

Standard features (standard across the 3 series)

  • Complete stainless steel frame and control panel
  • Auto operation capability (with high-low level control option)
  • Corrosion resistant high pressure tubing
  • High quality. Food grade approved components
  • Side & rear access for ease of maintenance
  • Feed water check valve
  • Product water check valve
  • Inlet solenoid valve
  • RO controller for system control
  • High rejection T.F.C. Membranes
  • Isolation switch
  • High capacity poly spun 05 micron sediment pre-filter
  • Corrosion resistant membrane pressure vessels
  • Liquid filled pre-filter & post-filter gauges
  • Liquid filled high pressure gauge
  • Panel mounted adjustable pressure regulators
  • Totally enclosed fan cooled industrial motor
  • Stainless steel multi-stage high pressure pump
  • Low pressure safety back-up switch
  • Three inlet/outlet connections for ease of installation
  • Single power source connection
  • Clearly identified instruments, valves & components
  • Easy to understand installation/operation manual
  • Moulded filter housing spanner for quick filter replacement
  • One year limited warranty

 

Options

  • Stainless steel vane pump
  • Feed/delivery pumps
  • Auto high-low level tank controls
  • Anti-scalant dosing system
  • Raw water & product water storage tanks

 

Nominal capacity

 

Model 2 3 4 5 6 8
Litres/min 1.4 2.1 2.8 3.5 4.2 5.5
Litres/Hour 83 125 166 208 250 333
Litres/Day 2,000 3,000 4,000 5,000 6,000 8,000

 

Salt Rejection up to 98%

Recovery Rate 50% to 75%

Nominal capacities listed above are based on feed water temperature @ 25°c and salinity @ 1500 ppm TDS. actual output capacities are subject to change according to variations in feed water characteristics.

 

Dimensions (mm) & Weight (Kg)

 

Model 2 3 4 5 6 8
Height 1,650
Depth 400
Width 600
Weight 125

 

Electrical

 

Model 2 3 4 5 6 8
Kw 0.375 kW 0.75 kW

 

Single Phase 240V/50Hz

 

Plumbing

Minimum feed water flow rate @ minimum pressure 350kPa:

Model 2 3 4 5 6 8
Flow 10 Litres/Min

 

Max Operating Pressure 1,400 kPa

Inlet Connection ¾ inch Male BSP

Outlet Connection ¾ inch Male BSP

Reject Connection ¾ inch Male BSP

 


 

PRO L SERIES

10,000 to 30,000 Litres Per Day

 Unique features (different between the 3 series)

  • Product and reject flow meters
  • Stainless steel multi-stage high pressure pump

 

Standard Features (common between the 3 series)

  • Complete stainless steel frame and control panel
  • Auto operation capability (with high-low level control option)
  • Corrosion resistant high pressure tubing
  • High quality. Food grade approved components
  • Side & rear access for ease of maintenance
  • Feed water check valve
  • Product water check valve
  • Inlet solenoid valve
  • RO controller for system control
  • High rejection T.F.C. Membranes
  • Isolation switch
  • High capacity poly spun 05 micron sediment pre-filter
  • Corrosion resistant membrane pressure vessels
  • Liquid filled pre-filter & post-filter gauges
  • Liquid filled high pressure gauge
  • Panel mounted adjustable pressure regulators
  • Totally enclosed fan cooled industrial motor
  • Low pressure safety back-up switch
  • Three inlet/outlet connections for ease of installation
  • Single power source connection
  • Clearly identified instruments, valves & components
  • Easy to understand installation/operation manual
  • Moulded filter housing spanner for quick filter replacement
  • One year limited warranty

Options

  • Feed/delivery pumps
  • Alternative voltages
  • Auto high-low level tank controls
  • Anti-scalant dosing system
  • Raw water & product water storage tanks

 

Nominal capacity

Model 10 15 20 25 30
Litres/min 7 10 14 17 21
Litres/Hour 420 625 840 1,040 1,250
Litres/Day 10,000 15,000 20,000 25,000 30,000

 

Salt Rejection up to 98%

Recovery Rate 50% to 75%

Nominal capacities listed above are based on feed water temperature @ 25°c and salinity @ 1500 ppm TDS. actual output capacities are subject to change according to variations in feed water characteristics.

Dimensions (mm) & Weight (Kg)

 

Model 10 15 20 25 30
Height 1,650
Depth 450 550
Width 650
Weight 95 105 115 125

 

Electrical

 

Model 10 15 20 25 30
Kw 1.5 2.2 3.0

 

Single Phase 240V/50Hz

Three Phase 380-415V

 

Plumbing

Max. Raw Water Flow rate @ 350kPa:

Model 10 15 20 25 30
Flow L/m 30 40 50 60 70

 

Max Operating Pressure 1,500 kPa

In-let Connection 25mm Male BSP

Out-let Connection 25mm Male BSP

Reject Connection 25mm Male BSP

 


 

PRO B SERIES

10,000 to 30,000 Litres Per Day

Greater capacity to handle total dissolved salts

Unique features (different between the 3 series)

  • Salinity monitor with variable salinity output
  • Product and reject flow meters
  • 316 stainless steel multi-stage high pressure pump

Standard Features (common between the 3 series)

  • Complete stainless steel frame and control panel
  • Auto operation capability (with high-low level control option)
  • Corrosion resistant high pressure tubing
  • High quality food grade approved components
  • Side & rear access for ease of maintenance
  • Salinity monitor with variable salinity output
  • Feed water check valve
  • Product water check valve
  • In-let solenoid valve
  • High capacity poly spun 05 micron sediment pre filter
  • Time delay device for efficient start-up
  • High rejection T.F.C membranes
  • Isolation switch
  • Corrosion resistant membrane
  • Pressure vessels
  • Liquid filled pre filter & post
  • Filter gauges
  • Liquid filled high pressure gauge
  • Panel mounted adjustable pressure regulator
  • Totally enclosed fan cooled industrial motor
  • Low pressure safety back-up switch
  • Three inlet/outlet connections for ease of installation
  • Single power source connection
  • Clearly identified instruments, valves & components
  • Easy to understand installation/operation manual
  • Moulded filter housing spanner for quick filter replacement
  • One year limited warranty

Options

  • Raw water & product water storage tanks
  • Auto high-low level tank controls
  • Feed/delivery pumps
  • Membrane cleaning system
  • Anti-scalant dosing system
  • Alternative voltages
  • Packaging & wooden & crating for transportation

Nominal capacity

Model 1000 1500 2000 2500 3000
Litres/Hour 417 625 833 1,042 1,250
Litres/Day 10,000 15,000 20,000 25,000 30,000

Salt Rejection up to 98%

Recovery Rate 33% to 50%

Nominal capacities listed above are based on feed water temperature @ 25°c and salinity @ 7,500 ppm TDS. actual output capacities are subject to change according to variations in feed water characteristics.

Dimensions (mm) & Weight (Kg)

Model 1000 1500 2000 2500 3000
Height 1,650
Depth 450 550
Width 650
Weight 95 105 115 125

 

Electrical

Model 1000 1500 2000 2500 3000
Kw 2.2 3.0 5.5

Single Phase 240V/50Hz

Three Phase 380-415V

Plumbing

Max. Raw Water Flow rate @ 350kPa:

Model 1000 1500 2000 2500 3000
Flow L/m 30 40 50 60 70

Max Operating Pressure 2,100 kPa

In-let Connection 25mm Male BSP

Out-let Connection 25mm Male BSP

Reject Connection 25mm Male BSP

Ordering

For more information and ordering Please Contact Rowater Australia.